ToolTipText: -
20620 "IDH_SetAxisY"
20621 "scrollbar will rotate the features around
the vertical axis Opp.click to reset to component 2."
The default for
this control is 2 (or 720 degrees). Note: - If you set slider for
the X-axis below 360 then all the features
will collapse to the vertical axis as shown here.
Using this slider will rotate the features around the vertical axis
and if you keep the mouse button clicked or use the arrow keys when selected
on this scrollbar the plot will keep rotating but will stop as soon as
you take your finger off the button. As an aid to automatic rotation if
the system finds that the Y-axis is not an integer (i.e., just click the
up scroll once) then, when you scroll the Z-axis,
then for each degree of increment of the Z-axis there will be a degree
of increment in the Y-axis. The same applies for the X-axis. In this
way you can achieve a full rotation in only 180 degrees instead of the
normal 360. If you want to reset the Y-axis back to its default Opp.click
this slider. You can also activate stage three of the reset
control.